Laser beams

Independent double light source, one key intelligent dimming

Product overview

The working principle of laser beam is based on the transmission and reception of the laser beam. The operation adjusts the transmitter to emit the laser beam to ensure that the beam is normally received by the receiver. When there is an object blocking the beam, the laser beam system will generate an alarm.

The laser has strong penetration ability and long distance, strong anti-interference, even in rain and fog weather, the beam can reach the receiving end normally, and will not cause false positives.

Independent double light source

One-click intelligent dimming

Full network support

Independent double light source

Full network support

One-click intelligent dimming

Product Personalized Features

Customized narrowband lenses

Supports local upgrades

Product Featured Contents

Intelligent obstruction alarm

Each beam can be individually turned on or off.Distinguish between real intrusion and natural interference through intelligent settings.

Soft start protection

Utilizing APC power regulation technology to extend the service life of the equipment and ensure system safety.Gradual voltage rise avoids instantaneous high current impact, ensuring a smooth and reliable start.

Human-machine interaction

1.5-inch OLED screen display.Displays the intensity and working status of each laser beam.Makes settings and control more convenient.

Multiple power supply options

All-aluminum alloy housing

Adjustable body angle

Application scenarios

Entrance and exit inspection

Pedestrian access: At the entrance of a vital facility, it can be used to detect people trying to enter or leave.
Vehicle access: Detection of vehicle entry and exit, especially where automatic counting or altitude identification is required.

Perimeter intrusion alarm

Closed area: Form an invisible cordon around the perimeter of sensitive facilities.
Open areas: such as airport runways, energy facilities, etc., can detect a longer distance intrusion.

Traffic condition monitoring

Bridges and tunnels: Monitor traffic flow and detect anomalies such as accidents or congestion.
Along the railway line: Monitor obstacles on both sides of the track to prevent train accidents.

Installation effect

Product parameters

C3 Laser beam

Laser wavelength

808nm, visible light wavelength: 650nm (red light)

Beam

2, 4 beams, beam spacing 15cm

Detection distance

50m, 100m, 200m

Material

Aluminum alloy

Power supply

DC10~30V or AC24V

Angle adjustment

horizontal ±15°, vertical ±15°

Protection level

IP66

Alarm output

normally open, normally closed dry node output

Operating temperature

-40~80℃

Working humidity

≤95%

Related products

F7 Fiber optic intrusion detection system

The photoelastic effect is used in the fiber optic intrusion detection system. When there is an external vibration on the optic cable, the phase of the light in the sensing cable will change. After photoelectric conversion, acquisition and analysis, the vibration signal is obtained to determine whether there is intrusion.

G5p Pulse electric fence

As for the pulse electric fence, the pulse generated by the energizer is transmitted to each front-end alloy wire through high-voltage insulated wires. In case of climbing and destruction, it will cause short circuit to the two adjacent alloy wires and trigger the alarm, which has the functions of blocking and deterrence.

C3 Laser beams

The working principle of laser beam is based on the transmission and reception of the laser beam. The operation adjusts the transmitter to emit the laser beam to ensure that the beam is normally received by the receiver. When there is an object blocking the beam, the laser beam system will generate an alarm. The laser has strong penetration ability and long distance, strong anti-interference, even in rain and fog weather, the beam can reach the receiving end normally, and will not cause false positives.

Have questions？We can help

Please complete the following fields.